How to Refinish a Kitchen Table Part 2

How to finish a kitchen table, part 2,, DIY, kitchen, grey table, kitchen, gray table

Ready for part 2 of how to refinish a kitchen table? This part was a lot of fun, and involved  a lot of patience! 🙂 My advice to you would be to grab another table to have set up in your kitchen while you are working on your current one so that little hands wont be too curious!

These are the items you will need: Small sponge roller, large sponge, base paint/primer, brush, glaze, white paint for white wash, and polycrylic glaze for the finishing coat.

I started by painting the table grey. Initially I thought I would paint just the table top. But once the top was done I realized the rest of the table really needed a face lift so I painted the whole thing grey. I found this grey paint in the “whoops” section of the Home Depot paint department. The whole gallon was only $7! If you can try to find a paint that is a paint/primer combo to save you time. I simply rolled this on and was able to do a couple of coats pretty quickly. Make sure to let it dry between two applications.



The trick of dry brushing is to get a small amount of paint on the brush and keep the strokes light and long. Try not to pick up the brush as you are making your strokes and work on sections at a time to try to match the same amount of texture. This gave me the wood look I was going for.

My next step was glazing. Glaze can be bought clear and have any color added to it to a add a little interest to the glaze. Black paint was added to mine because I wanted to be able to highlight the design of the furniture with a darker color. This part could be done with a roller, and that would probably be easier, but my roller wasn’t available and the brush look was what I was going for anyway. Let the glaze sit for a couple of minutes and then wipe off with a damp sponge. The longer you let it sit the darker it will be. This was one of the trickiest parts for me because I wanted the streaks, but I wanted it to have a smooth finish all over the table. There times I had to let it dry and then go back to lighter parts and re-glaze them to match the darker places on the table. It wasn’t perfect, but I was okay with that too.

Typically I did larger sections than this at a time but wanted to have my husband take the picture while he was around! 🙂

This gives you an idea of what it looks like up close.

The last step was three coats of polycrylic. I simply rolled this on and made sure to let it dry really well between each coat (I waited until the next day.)

 Tada! I am really excited with how it turned out! Now I just need to refinish the chairs and pick a new fabric for the cushions. Trying to decide if I should do the whole covering the seats with plastic thing. I don’t love the look, but it makes so much sense with little ones running around. Let me know if you have any questions! I want to see your projects too!

If you missed part one you can find it here:

How to refinish a kitchen table, part one,

Part One

how to redo your kitchen table, DIY,

Part Three

DIY kitchen chairs, before and after,

Kitchen Chairs


Add a comment...

Your email is never published or shared. Required fields are marked *

  • Camilla, that looks amazing. I am sure it looks fantastic in your new home. Way to go!!!ReplyCancel

  • LOVE it. grey is my favorite, and this is gorgeous! great job!!ReplyCancel

  • Cassia

    It turned out gorgeous!! Thanks for sharing!!ReplyCancel

  • Marie

    you may have already covered your chairs but I am about to do a similar project and did not want the plastic either. With 4 kids I needed some stain resistance. I bought oil cloth. It comes in a ton of print options, not too expensive but can wipe clean!!
    Good luck!ReplyCancel

    • I still need to paint them, but I did find fabric that already had a plastic like material sealed to it that works rather well. I want to see your before and after Picts! Thanks for the tips!ReplyCancel

  • leah

    I love it! I’m going to greywash my table in a few weeks and this is exactly how i’d like it to look. I have just a few questions. So you said you painted the table the grey (looks like its a relatively light grey)with a few coats with a roller then the next thing you say is about the trick to drybrushing…was that with the same grey for the first, solid coats? As for the glaze, do you tell them how much black to add or do you just say you want black added and they just do it? Thanks so much! I hope mine turns out half as good as yours did!ReplyCancel

  • leah

    oh! one more question! How has it held up? I have little kids too so I’m curious! 🙂ReplyCancel

    • Hi Leah!

      It has held up really well! I have had a couple instances when the paint was fresher that I didn’t remove a cereal bowl with milk below it that became stuck and pulled little bits of the paint. 🙁 so when the paint is new-ish keep an eye on that.

      The glaze was mixed with black paint and was actually left over from a neighbors project. To the eye it looked pretty black though. The white wash was actually using white paint mixed with water once my grey coats had dried. I still love it! I hope I answered all of your questions!

      ~good luck!


  • Elisabeth

    I recently glazed some of our cabinets with an antiquing glaze that Lowes sells by Valspar that worked great. They ended up looking very similar to what you have here.
    How did you decide what finish to go with? What are the qualities of it? I originally tried a lacquer on an area of my cabinets that yellowed the area (painted white) that had to be redone. I’m fairly new to artistic painting with furniture, especially with holding around little hands and accidents :).ReplyCancel

    • Hi Elisabeth!

      I wanted something that looked “beachy” and was hoping that there would be some grain wood underneath when I sanded the table down because it is is a great table. I was shocked to find that it was a composite wood with no grain! That is why I used this hand brush technique to mimic what wood grain stained would look like.
      So far I’ve had no yellowing and until I can get a new table I just keep changing up this old one! 🙂
      I kind of just made this up and applied different bits I had learned from reading other tutorials online. And yes, little hands can get in the way sometimes!ReplyCancel

  • Elisabeth

    Well, I think you did an awesome job, especially love the glazed carvings, and I’d keep that table til it fell apart! I:)ReplyCancel

  • Gloria Tulip

    If for some reason you absolutely can’t live with the appearance after glazing, and if you realize this rather quickly, you can wash the glaze off and let dry and redo.ReplyCancel

  • Lucy

    Please send tips for chairsReplyCancel


MyMommyStyle Meet Camille

Hello! I am Camille, a wife, mother of four, Disney obsessed, certified teacher, and reality optimist. Motherhood comes with its ups and downs, and I hope while you're here you'll find something that makes your #momlife easier!


join me on instagram



Embrace the Mom You AreMy Mommy Style

join me on instagram

Embrace the Mom You AreMy Mommy Style


8146821 f19d54f5